Jeep Grand Cherokee Forum banner
1 - 6 of 6 Posts

_98_ZJ_

· Registered
Joined
·
20 Posts
Discussion starter · #1 ·
alright i think im gonna go ahead and take the front bumper off completely this weekend. But im not too sure what to do with the plastic in the fenderwell.should i just cut it off or take it off all together? i dont want to get alot of mud and dirt trapped up there so is that the best way to go?
thanks
 
Just cut it to be flush. I just eyeballed mine, and cut it as much as I thought looked good. Also, you need to cut it enough so that at full lock and flexed your tires don't grab it.
 
I have cut my bumper back and cut the bottom off. I am getting together some pics of my front bumper and the side cladding painted. Also some other stuff. My front bumper and grill as well looks alot like bigclays. Just trim as needed. What size tires are you running? Good luck.
 
check out my build thread for some pics "Project White Noise"

Also, incase you don't know, there is metal canister on the drivers side, this is the charcoal canister and has to do with the fuel vapors, do not cut this canister. You can move the canister if you want (do a search), but do not cut it or disconnect it. When I cut my bumper the canister hung down just a little bit, but nothing major.
 
1 - 6 of 6 Posts