Jeep Grand Cherokee Forum banner
1 - 5 of 5 Posts

mitcheak

· Registered
Joined
·
90 Posts
Discussion starter · #1 ·
Every time I get in my 97 ZJ, I roll all the windows down. Its a pain using four fingers and holding down the switch until all the windows are down. Would there be a way to wire one switch to roll all the windows down while still letting the passengers have control of their windows? The front driver side window has an auto roll down. Would it be possible in wiring to have the switch be able to auto roll down all the windows, and even better, auto roll up all the windows? Any help/ideas would be greatly appreciated.
 
Re: Auto-Rollup

MarginWalker said:
Auto rollup gonna be harder to do, since you need a thermal cutout or some other means to stop the motor so you don't chop of your arm or your dog's head.
I've got your solution right here, actually:
Parts Express

You need one module per direction, so four would get you power up and power down front and rear.

I have one of these in my Jeep that I have hooked up to the aux output on my auto start alarm. I hit button 1 to start it, hit button 3 to close the windows so that the AC can cool everything off while I get ready, then use button 2 to unlock the doors when I'm ready to go.
 
1 - 5 of 5 Posts