[MarlonT]

Having problem w/ the ZJ after disabling the ABS. Theres a clicking sound at the front area where the fuse block is (passenger side). Reinstall the relays and it stop. Is this normal or Im missing another relay somewhere.

1997 ZJ,V8

 

[Broder1020]

I just pulled the relay in the main fuse panel on mine last week and got no clicking or any adverse effects accept the ABS light on the dash. GL
Ryan

 

[MarlonT]

Thats what I figure. Last time I took the relay out of fuse block at the engine compartment when off roading no noise and brakes were normal. It maybe something else. I heard many have done this and no side effect or whatsnot to the CPU or brakes when swapping axles.

I notice the battery being weak due to long time being off. Maybe its battery related noise?

 

[Jeepinparrothead]

When batteries get weak they can cause some strange things to happen. So it maybe. I would have someone run battery check on it and see what they say.

 

[MarlonT]

Hoping its the battery and not the CPU freaking out since i took all ABS sensor off. We charge the battery for about an hour and connect it. Maybe it needs a longer charge for the battery to hold the charge.

 

[MarlonT]

Battery!!! - dead cell after only a year use, got a new replacement (warranty) and all things normal. ABS light 's still on :? I guess black tape or quarter will do the work for me.

 

[delboy]

pull the ABS fuse in the dash panel near the passenger door area, should get rid of the ABS dash warning light.

 

[MarlonT]

I took that fuse out (10 amps) and two relay fuse at the engine area fuse block, still has light.

 

[nate379]

Yeah. Just take the light bulb out. Only takes 10-15 minutes to get the dash apart and back together.