Jeep Grand Cherokee Forum banner
1 - 2 of 14 Posts
All you need to do is remove the grill and there are 2 big bolts on each side. Get a peice of metal around 4" long and make the holes and you are done. I wired mine to only come on with the high beams because they are very bright. They are actually the cheap walmart 55w lights that cost $10-15. They make a night and day difference and I wouldn't really care if someone took them compared to a set of piaa's or something.

Here are 2 pics. If "show picture" doesn't work click properties and paste the link and if it still don't work just forget it.

Image

Image
 
Re: light

grand94jeep said:
white94zj said:
All you need to do is remove the grill and there are 2 big bolts on each side. Get a peice of metal around 4" long and make the holes and you are done. I wired mine to only come on with the high beams because they are very bright. They are actually the cheap walmart 55w lights that cost $10-15. They make a night and day difference and I wouldn't really care if someone took them compared to a set of piaa's or something.

Here are 2 pics. If "show picture" doesn't work click properties and paste the link and if it still don't work just forget it.
I ran these same lights. Just a little advice. Take them apart every now and then and spray some oil on the rear of the housing. Mine rusted so bad the bulb was seized in place. I know they're cheap lights, but its still a PITA. :thumbsup:
I ran them behind the grill of an old car I had and found that out. They are excellent lights for the price though. I would never run them on all the time because of that, just with high beams. I think the lenses crack easily because both of mine were pretty bad the jeep should be better because its higher. Also, the lights in my pic are straight. I don't know why it looks cross-eyed.
:thumbsup:
 
1 - 2 of 14 Posts