[JEEPZJ93LAREDO]

Just got Rusty's lower control arms for my 93 ZJ i have 4 inches of lift (yes i know i don't really need them but my bushing were worn out on my stock ones) Anyways i got them and the front one are bent, but im just not sure which way the bend should be in relation to the vehicle. Thanks for the help.

 

[Shadow]

When you Install them the bend should go to the bottom. Should look like a hokey stick. The purpose of this design is to relieve stress on mounting points cause by the angle of attack. The theory is that it will act closer to stock set-ups.

 

[JEEPZJ93LAREDO]

I asked for regular front lower control arms like u are talking about with the bend at the bottom, but this is what was sent is this right for a 4inch lift or wrong? LINK

 

[Shadow]

Wow!! I checked out the link you posted. Interesting those arms are made so prevent tire rub at full steering lock. The bend should be away from the tire just like it shows in the picture. Let us know how they work out. As fare as being right or wrong, I would say they will be alright. There not adjustable arms but if you ordered them for the appropriate lift height you be fine.

 

[JEEPZJ93LAREDO]

Thank you for the help i called they said on the grand these are correct and im putting them in on Sunday.

 

[Shadow]

Good luck! Post up some pics for all of us to see.

 

[6Banger]

yea definitely post pics

 

[Ted_Z]

I use Rusty's clearance arm and love them. With BFG 31's on stock 8" wide Canyon wheels I was rubbing on turns, maybe at 85% of lock. Now with the clearance arms, no rubbing at all.