Jeep Grand Cherokee Forum banner
1 - 2 of 15 Posts
Jeep2Relax said:
is the track bar still connected?
if it is off you should be able to move the axle side to side and get the holes to line up. and then reconnect the track bar.
exactly :spank:
 
nah, the TB is easy... have someone turn the car in to the on postion, not running, but on, and turn the steering wheel until it lines up, you might have to tap it with a hammper or whatever to get it to move once its inside the mount, but a hammer a screwdriver an someone turning the wheel with the TB discoed, will shitf the body over the axle (assuming is on the ground) and youll be able to line it up with the screwdriver then tell them to hold it, and dont move the wheel at all while you put the bolt in, and the nut plate back in... :thumb:
 
1 - 2 of 15 Posts