Jeep Grand Cherokee Forum banner
1 - 8 of 8 Posts

Killerzj

· Registered
Joined
·
50 Posts
Discussion starter · #1 ·
So I was tinkering around with thI have 1.75" spacers mounted on top of my 3" coil springs. I have from, from top to bottom - Stock isolators (2), Spring spacer, and the spring itself. My problem is this: The right side spacer does not look like it is settled well, and I've tride to put the coil spacer on top of the isolaters to see what would happen, but it will not fit like that, it's wierd. The isolators seem fine to me, btw. The spacer on the right side is curved, too...

:puzzled:

Right side of the Jeep with the problem:

Image

Image


Left side of the Jeep:

Image

Image


Left side seems absolutely fine to me.

Rock Krawler's spacers (which is what those are) dont have specifically f/r spacers, because the rear ones dont fit around the spring retention post. It is too loose but the front is perfect. Thanks guys.
 
I don't know if I grasp the problem from your pics. Looks like the right side settled more than the left- ie the right is hitting the "body" while the left isn't.
 
Looks like the spacers are not designed for the ZJ. They should clear that pinch weld at the body. That way the spacer can sit against the body then the isolator will separate it from the spring, like the factory intended. This would be the best scenario.
 
1 - 8 of 8 Posts