[blisters]

Well, what is the problem(s) you are having, if any? AS you can see, this is a pretty generic code that covers a lot of different stuff. Does the engine start and run? DOes the fuel guage seem to work?

 

[blisters]

When my fuel pump failed, the engine gradually (over a couple months) lost power, then on the highway suddenly wouldn't do better than idle.

It sounds like a true open circuit problem, like a loose connection. Since you're having problems with two separate parts on the same assembly, I would check the plugs very carefully for corrosion or looseness, especially the ground. Plus, I would follow the ground circuit all the way to where it actually connects to the car frame. I don't have a manual for that year, so I can't tell you which wire it is. If that stuff looks perfect, then you will have to pull the fuel pump/ gage sender/ filter/ pressure regulator assembly and inspect all that stuff. If you think it's original, then you really ought to replace it all. I got one assembly from the dealer for about $350.00 (!), and I had to adjust the gage sender float to read a lot closer to true level (on mine it would read totally full for about 3 gallons, or 1/7th of a tank).

Good luck!