I hate to do this, but i am in a tight spot and i need to get some money together. I just bought Clayton's jeep/buggy from him this summer and i have to get rid of it. If you have seen it and seen him drive it, you know it is pretty serious. It will go anywhere you want it to go. Just point and step on the gas. As for the details on it, i will make it quick and if you have any questions, feel free to ask.
-Started out as a Grand cherokee, '95 i believe. The only thing left on the buggy from the jeep is pretty much the front part of the unibody, and part of the hood.
-4.0L 6 cyl motor with auto tranny and np231 with sye
-allied beed locks with 38.5" sx's (i believe....i have to check)
-front d44 from a waggy. brand new ctm u-joints. warn inners and outters, warn locking hubs, 5.38's with arb
-rear d44 from a waggy. 5.38's with an arb. stock shafts. rear disk brakes
-fuel cell mounted ontop of rear axle to keep fuel cell level at all times (will take a picture)
-clayton custom long arms. rear triangulated 4 link.
-full skid
-custom tube chassis with integrated rollcage.
-j20 steering box with custom tiedrod/draglink (tie rod is a little bent. does steer perfectly but could use a little work)
-set up for 4/5 point harnesses, however, seats and harnesses not included
there is much more that i probably forgot to include. once i take some pics, i will post some more info on the buggy. make me an offer and we can talk about it
-Started out as a Grand cherokee, '95 i believe. The only thing left on the buggy from the jeep is pretty much the front part of the unibody, and part of the hood.
-4.0L 6 cyl motor with auto tranny and np231 with sye
-allied beed locks with 38.5" sx's (i believe....i have to check)
-front d44 from a waggy. brand new ctm u-joints. warn inners and outters, warn locking hubs, 5.38's with arb
-rear d44 from a waggy. 5.38's with an arb. stock shafts. rear disk brakes
-fuel cell mounted ontop of rear axle to keep fuel cell level at all times (will take a picture)
-clayton custom long arms. rear triangulated 4 link.
-full skid
-custom tube chassis with integrated rollcage.
-j20 steering box with custom tiedrod/draglink (tie rod is a little bent. does steer perfectly but could use a little work)
-set up for 4/5 point harnesses, however, seats and harnesses not included
there is much more that i probably forgot to include. once i take some pics, i will post some more info on the buggy. make me an offer and we can talk about it
