Jeep Grand Cherokee Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
Hey everyone Long time lurker first time poster here.
So I have a 96 zj 4.0l with a rubicon express 4.5” lift kit the non long arm version. So I also installed a cavfab cross over steering 1ton kit. Also have an xj pitman arm. I have a ton Of bump steer and was wondering who has had this issue and how to fix it.
I am assuming I need to get the rubicon express drop trackbar mount and new trackbar but just seeing if anyone has had similar issues with the same type of setup I have.
Thx in advanced
 

·
Super Moderator
Joined
·
569 Posts
have you checked the king pin angles are correct or in spec?
also track bar and steering arm need to be at similar angles to each other
 

·
Registered
Joined
·
2 Posts
Discussion Starter #3
So I have no idea about king pin angle I did get an alignment and it’s within spec. I’m assuming the trackbar isn’t big enough because my kit didn’t come with a drop trackbar mount or trackbar.
 
1 - 3 of 3 Posts
Top