Jeep Grand Cherokee Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-7 of 8 Results
  1. Drivetrain Tech Center
    I replaced the oil pan gasket on my 94 Jeep Grande Cherokee 4.0L, all wheel drive, 42RE trans. I started the Jeep to check for engine oil leaks and the trans started hemorrhaging trans fluid from between the trans pan and gasket, mostly on the driver's side. I shifted the trans into forward...
  2. Drivetrain Tech Center
    hey guys Im having trouble with my 42re in my 96 zj and was hunting around and found a good deal on a 42re out of a 95 zj. What i was wondering was is there a huge difference between the two because the years? The engine is still on the trans and I have read you just need to pull the trans, tq...
  3. Drivetrain Tech Center
    Hi Guys, I'm posting this all the way from Australia Hopefully some American Jeep knowledge will get me back into mine again. I basically need to know if a 96/97 42re transmission will fit into my 98 4.0L Grand Cherokee. I've heard that different models ran different computers and TCMs so I'm...
  4. Drivetrain Tech Center
    I have read all the posts about 42RE problems without finding one like mine, so I decided to post my findings. I did'nt have the "limp home" high gear start, and also had no codes. What I had was, one day the trans. was perfect...and the next morning when I woke up to go to work the engine...
  5. Drivetrain Tech Center
    i have a slow trans. leak, mechanic says its the trans cooler lines, and its a $350 fix. is this an easy fix if i were to do it myself, and where are they located? i have the 4.0L and the 42RE transmission.
  6. Drivetrain Tech Center
    Recently had transmission failure in my 2001. Was told that 1994-2004 42RE transmissions were the same -- Bought a used 1996 42RE and had installed. The jeep ran great the 1st time it was driven - shifted perfect. Pulled it back in the shop to re-check fluids and when it was time to take...
  7. Drivetrain Tech Center
    The wifes 97 is doing the surge thing when you put it in gear. I don't like the looks of the fluid. I mail ordered a solenoid and sensor kit and installed them today. Installed a new filter and gasket. Had to clean aluminum off almost half the bolt threads to the tranny pan so I'll be on the...
1-7 of 8 Results
Top