Jeep Grand Cherokee Forum banner
1 - 7 of 7 Posts

jeffparra

· Registered
Joined
·
144 Posts
Discussion starter · #1 ·
Well finally im gonna get the rusty lift.It should be put on in the next couple of weeks if it comes in time. And then i will post pics.
this is what i got
Front and rear coils
rear trac bar bracket
front adjustable trac bar with frame mount
sooner or later i will get control arms and better shocks
but i wanted to say thanks for yalls help
 
Discussion starter · #3 ·
did you get a dw, :eek: that is the only thing im worried about
 
Just wanted to give a heads-up on the rear track-bar bracket. I had mine on for a little more than a year when it started to break the original bracket metal. I welded it up, and it broke in a new place. I welded it again, and it broke in another place. The metal was fatigued, and would not stand up to the additional leverage which Rusty's bracket puts on it.

I recently welded on a brace, which goes from the rear of the spring perch to the bracket. This makes about a 45 degree angle and looks like it will hold this time.....I hope.
 
Discussion starter · #6 ·
thanks for the heads up, will tell my friend to help me weld up some supports
 
YEH...I second the rear track bar bracket, I have put a few on in the past, and they have broken even with LIGHT wheeling AND on the road.. Personally, I would personally make a rear bar. It is not hard by any means...GOOD LUCK..peace
Bennett
 
1 - 7 of 7 Posts