Jeep Grand Cherokee Forum banner
1 - 4 of 4 Posts

freekrider26

· Registered
Joined
·
13 Posts
Discussion starter · #1 ·
Same thread as "In desperate need of help" but the title doesnt make people want to looks so here is my problem

i was driving in the snow today and slide and hit a curb going about 10 or so and after that my computers cut out, the onboard ones(that show the diagram of the car, direction, tempature and such). well it still ran fine and i didnt hear any bad noises or anything. When i parked it, it seemed fine. but when i went back to start it, all the gauges turned on and all the lights, but the onboard computers didnt and it wont start, not even start. what is wrong. please help me
 
i get that once in a while. everything turns on, working fine, it just does not start. for some reason, if i step on the brake, run the shifter through all the gears, leave it in N w/ foot on break and then see if it starts. works for me. might have to do it a couple times. make sure it is all the way in park too. i know it sounds weird but it works for me.
 
I just replace the 5.2 in my grand and it wouldn't crank. I figured out that i didn't have a sensor connected. All my power inside would work, but no power to the starter or fuel pump. After i found the sensor and connected it, i haven't had any problems sense. Dodges are the same way. I know a girl who's 1500 would run one day and not another. The dealer couldn't even fix it. Turned out to be the temp sensor on the intake.
And now.... All of that, to say..... It might all be from a simple temp sensor or any other sensor.
 
1 - 4 of 4 Posts