02 sensors, can I move them around? - North American Grand Cherokee Association
North American Grand Cherokee Association

Go Back   North American Grand Cherokee Association > Grand Cherokee Forum > Jeep Grand Cherokee Lounge-ZJ/WJ
Nagca.com is the premier Jeep Cherokee Forum on the internet. Registered Users do not see the above ads.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 04-22-2019, 09:03 PM   #1
Mofugly13
Junior Member
Grand Rookie
 
Join Date: Apr 2019
Location: San Francisco
Posts: 2
Default 02 sensors, can I move them around?

I have a 99 WJ, 4.0 Calif. emissions. This weekend I replaced the oxygen sensors with NTK OE ones, using the part numbers supplied by NTK. The problem is that the B1S1 senders pigtail isnít long enough to reach the engine connector. Iíve verified the part number is correct, and the pigtail length matches the part description on the site, but itís still about 4Ē short. Both of the B2 sensors have pigtails that are way longer than needed.

One of the B2 sensors has the same clocking pins as the B1 sensor, and the pigtails would both reach the connectors if I swapped the two.

Would it be ok to swap the upstream and downstream sensor?
Mofugly13 is online now   Reply With Quote
Sponsored Links
Advertisement
 
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 08:15 PM.



Powered by vBulletin® Copyright ©2000 - 2019, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.