tranny swap on a 4.0 - North American Grand Cherokee Association

SH8FT · 05-11-2002, 04:00 PM

i have a 94 w/ 5" lift 32s, ford 8.8 rear, quadratrac, and a blown tranny. what are my options for tranny replacement?? i kinda want a stronger one since this is my second one in 100k. thanks

PBJ · 05-11-2002, 05:23 PM

Hey I would contact Kolak@aol.com I got my Level 10 kit from him along with the transgo Shift kit. If you are rebuilding your tranny I woild suggest installing a breather tube as well.

SH8FT · 05-11-2002, 05:28 PM

i have not done any tranny work before, and im not too good with the lingo, and what not. could someone maybe give me some sort of an explanation about what i should do. if i cant find something interesting and different to trry, im prob. just gonna go with a junkyard tranny. thanks

PBJ · 05-11-2002, 06:43 PM

I don't do tranny work either. Most of the time when your tranny goes you bring it to a shop and they rebuild it. Just if you buy the parts from Kolak they will be better than if they were to just rebuild it with stock parts.

RazorZJ · 05-11-2002, 08:20 PM

I saw somthing on here about using a tranny from a 4.0 XJ, it's suposed to be a stronger tranny and would bolt right up to the engien, but would the computer throw a fit?

05-11-2002, 04:00 PM	#1
SH8FT Junior Member Grand Rookie Join Date: May 2002 Posts: 11	tranny swap on a 4.0 i have a 94 w/ 5" lift 32s, ford 8.8 rear, quadratrac, and a blown tranny. what are my options for tranny replacement?? i kinda want a stronger one since this is my second one in 100k. thanks __________________ SHAFT-he's one bad mutha...SHUT YO MOUTH...but I'm just talkin' about Shaft

05-11-2002, 05:23 PM	#2
PBJ Member Grand Rookie Join Date: May 2002 Location: Forked River, NJ Posts: 82	Hey I would contact Kolak@aol.com I got my Level 10 kit from him along with the transgo Shift kit. If you are rebuilding your tranny I woild suggest installing a breather tube as well. __________________ Ryan President of the Grand Cherokee Submarine Club "We can Swim" 1993 ZJ 4.6 5" Lift 32" Tires. JeepZJ

05-11-2002, 05:28 PM	#3
SH8FT Junior Member Grand Rookie Join Date: May 2002 Posts: 11	i have not done any tranny work before, and im not too good with the lingo, and what not. could someone maybe give me some sort of an explanation about what i should do. if i cant find something interesting and different to trry, im prob. just gonna go with a junkyard tranny. thanks __________________ SHAFT-he's one bad mutha...SHUT YO MOUTH...but I'm just talkin' about Shaft

05-11-2002, 06:43 PM	#4
PBJ Member Grand Rookie Join Date: May 2002 Location: Forked River, NJ Posts: 82	I don't do tranny work either. Most of the time when your tranny goes you bring it to a shop and they rebuild it. Just if you buy the parts from Kolak they will be better than if they were to just rebuild it with stock parts. __________________ Ryan President of the Grand Cherokee Submarine Club "We can Swim" 1993 ZJ 4.6 5" Lift 32" Tires. JeepZJ

05-11-2002, 08:20 PM	#5
RazorZJ Member Grand Rookie Join Date: Apr 2002 Location: louisville, ky Posts: 64	I saw somthing on here about using a tranny from a 4.0 XJ, it's suposed to be a stronger tranny and would bolt right up to the engien, but would the computer throw a fit? __________________ "Don't worry, alot of people are stupid." 95 ZJ Laredo 4.0L comand-track, ACCEL coil and ARB bull bar. I'd do more but I'm broke.

Remove Advertisements Sponsored Links
Nagca.com Advertisement

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode