Modified factory ZJ motor mount - North American Grand Cherokee Association

JWFAB · 07-18-2011, 09:20 AM

The factory drivers side motor mount fell apart so I cut it up and added a a poly bushing.

hagajames · 07-19-2011, 06:19 AM

Looks like good work.

andrewh530 · 07-09-2012, 11:05 PM

maybe you should offer to make them for others...

i would like a set...

Mutt · 07-10-2012, 05:20 AM

Seems like a extreme amount of work when you could of went this way. Scroll down to the 3rd item. I have these on my jeep work great.

http://www.teamgrandwagoneer.com/par...ion/more3.html

Utah_ZJ · 07-10-2012, 11:16 AM

This is cheaper and easier http://www.ebay.com/itm/Prothane-GRA...sories&vxp=mtr than what the OP did, just be warned that you will get a bit more noise and vibration in the vehicle with them.

andrewh530 · 07-13-2012, 07:20 PM

but i need a set for the 4.0L not the V8's

lostagain · 07-13-2012, 09:47 PM

i think you should save me the trouble and make me a couple

been wanting to do it for awhile just had other project going on, looks good!

07-18-2011, 09:20 AM	#1
JWFAB Junior Member Grand Rookie Join Date: Jun 2011 Location: East Mesa AZ Posts: 9	Modified factory ZJ motor mount The factory drivers side motor mount fell apart so I cut it up and added a a poly bushing. __________________ JW Fabrication http://www.virtualjeepclub.com/showt...Jw+fabrication

07-19-2011, 06:19 AM	#2
hagajames Senior Member Grand Junkie Join Date: Feb 2011 Location: Omaha Nebraska Posts: 153	Looks like good work. __________________ 2003 Grand Cherokee Laredo, stock 4WD no lift.

07-10-2012, 11:16 AM	#5
Utah_ZJ Senior Member Grand Master Join Date: Feb 2007 Location: Land of the Lost, Utah Posts: 1,340	This is cheaper and easier http://www.ebay.com/itm/Prothane-GRA...sories&vxp=mtr than what the OP did, just be warned that you will get a bit more noise and vibration in the vehicle with them. __________________ Just a couple of Jeeps.... If I were that cheap I wouldn't be driving a Jeep!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-09-2012, 11:05 PM	#3
andrewh530 Junior Member Grand Rookie Join Date: Jul 2012 Posts: 15	maybe you should offer to make them for others... i would like a set...

07-10-2012, 05:20 AM	#4
Mutt Administrator Grand Junkie Join Date: May 2010 Location: Central California Posts: 426	Seems like a extreme amount of work when you could of went this way. Scroll down to the 3rd item. I have these on my jeep work great. http://www.teamgrandwagoneer.com/par...ion/more3.html

07-13-2012, 07:20 PM	#6
andrewh530 Junior Member Grand Rookie Join Date: Jul 2012 Posts: 15	but i need a set for the 4.0L not the V8's

07-13-2012, 09:47 PM	#7
lostagain Junior Member Grand Rookie Join Date: Nov 2011 Posts: 15	i think you should save me the trouble and make me a couple been wanting to do it for awhile just had other project going on, looks good!

Remove Advertisements Sponsored Links
Nagca.com Advertisement