What did you do to your GC today? - Page 453 - North American Grand Cherokee Association

85IrocZ-28 · 02-28-2013, 09:24 PM

^X2, I like the look of the KO's on those wheels.

ejschultz · 03-02-2013, 07:07 PM

Yesterday and today I used it as a tow vehicle to move into our new house. It did a pretty good job on the 3 trips I had to make with the Uhaul trailer. Then, when I returned the trailer, I lost my nice hitch pin. I couldn't find it anywhere on the ground there.

Mutt · 03-03-2013, 03:50 AM

put a new starter on

camozj96 · 03-05-2013, 01:56 PM

wired up four KC daylighters to my roof rack. have a pile of parts to put in, just got a 4.5" IRO lift, new muffler and tailpipe and all new brakes all the way around.

gcjeeping · 03-05-2013, 02:18 PM

Went and filled it up and the jerry cans on the back too...

wildspear · 03-05-2013, 07:50 PM

Started my control arm bushing project. Before you yell at me, I'm going to take care of the brake line issue also....lol

Briian-Emmons · 03-09-2013, 08:27 AM

removed all the mud and cleaned it...

d@ddysjeep · 03-10-2013, 01:26 PM

This was all done friday when we had break in snow and it was decent temp.

Sprayed gloss clear coat over my badges that painted a flat black a couple
weekends ago. Got wiper arms repainted and gloss coated. They were rusty and
had paint chipped off places.

Also began an amateur (because i lack the funds and garage) shave project.
Removed rear wiper arm and took out wiper motor. Plus the knob the wiper
arm rests on. Never really worked that well anyway. Not sure if i want remove
radio antenna yet.

theone33 · 03-14-2013, 09:43 AM

Ok .... New cat, old one was the OG and had to go, MIG welded all pipes so there no exhaust leaks. 2 O2 sensors (up and down), IAC valve, Oil and Trans fluid change, rebuilt P.C.M. OG one had a short... MAP sensor, TPS (rewired both), Coolant sensor, intake air temp sensor, cap and rotor..... (97 GC 5.2 V8).... money well spent.

theone33 · 03-14-2013, 09:44 AM

Ok .... New cat, old one was the OG and had to go, welded all pipes so there no exhaust leaks. 2 O2 sensors (up and down), IAC valve, Oil and Trans fluid change, rebuilt P.C.M. OG one had a short... MAP sensor, TPS (rewired both), Coolant sensor, intake air temp sensor, cap and rotor..... (97 GC 5.2 V8).... money well spent.

02-28-2013, 09:24 PM	#4521
85IrocZ-28 YETI - The Abominable WJ Grand Master Join Date: Sep 2006 Location: Utah-243 miles from Moab Posts: 3,683	^X2, I like the look of the KO's on those wheels. __________________ 99 WJ Limited 4.7 \| 6.5" Rockkrawler LA \| 35" Goodyear MTR Kevlar's on MB TKO's Yukon 4.56 Gears \| QD2 - rocking the Varilocks \| Surco Rack with HID's \| LED rock lights \| Smittybilt 8k Iceland Bumper / Flares / Rock Sliders \| Protofab Rear Carrier \| Flowmaster \| SuperChips \| JKS Discos My Jeep won the war, your Honda mowed my lawn. Check out my BUILD THREAD

03-02-2013, 07:07 PM	#4522
ejschultz Senior Member Grand Addict Join Date: Sep 2010 Location: Schererville, IN Posts: 513	Yesterday and today I used it as a tow vehicle to move into our new house. It did a pretty good job on the 3 trips I had to make with the Uhaul trailer. Then, when I returned the trailer, I lost my nice hitch pin. I couldn't find it anywhere on the ground there. __________________ 97 ZJ TSi - 5.2L, 242, 4" IRO lift w/short arms & adj. TBs, JKS Discos & BPEs, DT3000s, Aussie out back, OEM skids/hooks/hitch, 31" Duratracs, 15x8s, Niner grille, Magnaflow stuff, HO alt, mean eyes, tinted signals, clear corners, system, cloth

03-05-2013, 01:56 PM	#4524
camozj96 Junior Member Grand Rookie Join Date: Sep 2012 Posts: 1	happenings wired up four KC daylighters to my roof rack. have a pile of parts to put in, just got a 4.5" IRO lift, new muffler and tailpipe and all new brakes all the way around. Last edited by camozj96; 03-05-2013 at 02:15 PM.

03-05-2013, 02:18 PM	#4525
gcjeeping Senior Member Grand Junkie Join Date: Jan 2009 Location: Beavercreek, Ohio, USAF RETIRED 462X0 Posts: 327	Went and filled it up and the jerry cans on the back too... __________________ My Build Thread-- GCJEEPING's build/mod thread-IT'S A GREEN THING... .... MISC JEEP STUFF

03-05-2013, 07:50 PM	#4526
wildspear Grand Zebra Grand Addict Join Date: May 2011 Location: western Michigan Posts: 538	Started my control arm bushing project. Before you yell at me, I'm going to take care of the brake line issue also....lol __________________ http://grandzebra.blogspot.com/

03-03-2013, 03:50 AM	#4523
Mutt Administrator Grand Junkie Join Date: May 2010 Location: Central California Posts: 426	put a new starter on

03-09-2013, 08:27 AM	#4527
Briian-Emmons Junior Member Grand Rookie Join Date: Feb 2011 Location: Basingstoke, England Posts: 8	removed all the mud and cleaned it...

03-10-2013, 01:26 PM	#4528
d@ddysjeep Junior Member Grand Rookie Join Date: Feb 2013 Location: Hopkins MN Posts: 4	This was all done friday when we had break in snow and it was decent temp. Sprayed gloss clear coat over my badges that painted a flat black a couple weekends ago. Got wiper arms repainted and gloss coated. They were rusty and had paint chipped off places. Also began an amateur (because i lack the funds and garage) shave project. Removed rear wiper arm and took out wiper motor. Plus the knob the wiper arm rests on. Never really worked that well anyway. Not sure if i want remove radio antenna yet. __________________ LoveYourJeep

03-14-2013, 09:43 AM	#4529
theone33 Member Grand Rookie Join Date: Nov 2009 Location: NY, NY Posts: 33	Ok .... New cat, old one was the OG and had to go, MIG welded all pipes so there no exhaust leaks. 2 O2 sensors (up and down), IAC valve, Oil and Trans fluid change, rebuilt P.C.M. OG one had a short... MAP sensor, TPS (rewired both), Coolant sensor, intake air temp sensor, cap and rotor..... (97 GC 5.2 V8).... money well spent. __________________ Gotta Love Jeeps....

03-14-2013, 09:44 AM	#4530
theone33 Member Grand Rookie Join Date: Nov 2009 Location: NY, NY Posts: 33	Good Week... Ok .... New cat, old one was the OG and had to go, welded all pipes so there no exhaust leaks. 2 O2 sensors (up and down), IAC valve, Oil and Trans fluid change, rebuilt P.C.M. OG one had a short... MAP sensor, TPS (rewired both), Coolant sensor, intake air temp sensor, cap and rotor..... (97 GC 5.2 V8).... money well spent. __________________ Gotta Love Jeeps....

Remove Advertisements Sponsored Links
Nagca.com Advertisement

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode