|
|
|||||||
| Home | Forum | Register | Photo Gallery | Donate | Members List | Advertise | Search | Today's Posts | Mark Forums Read | Auto Escrow | Auto Loans |
![]() |
|
|
Thread Tools | Display Modes |
|
|
#1 |
|
Member
Grand Rookie
|
I've tried everything I can think of. Where is the best place to route your rca cables from your radio through the dash? I tried following the stock wiring but run into the heater core. Please help me, this is my first time lol
__________________
S**t happens when you party naked |
|
|
|
| Sponsored Links | |||
Advertisement | |||
|
|
#2 |
|
Junior Member
Grand Rookie
Join Date: Mar 2012
Posts: 12
|
i took the ac and stuff out and ran them behind all that in mine i ran too sets of rca behind it and still had room
|
|
|
|
|
|
#3 |
|
Senior Member
Grand Addict
Join Date: Sep 2010
Location: Schererville, IN
Posts: 512
|
I ran mine over to the cluster, pulled the heater controls, reached up into the dash just above the heater duct on the passenger side, fed the RCAs down from behind the heater controls and grabbed them. I then proceeded to tuck them under the carpet and run them under the passenger side trim. It wasn't easy but it worked in my ZJ and in my buddy's ZJ when he put a system in it.
__________________
97 ZJ TSi - 5.2L, 242, 4" IRO lift w/short arms & adj. TBs, JKS Discos & BPEs, DT3000s, Aussie out back, OEM skids/hooks/hitch, 31" Duratracs, 15x8s, Niner grille, Magnaflow stuff, HO alt, mean eyes, tinted signals, clear corners, system, cloth |
|
|
|
|
|
#4 |
|
Senior Member
Grand Junkie
Join Date: Feb 2008
Posts: 322
|
I have 3 sets of RCA's in my jeep, 2 sets to the 4 channel amp running the speakers and another set to the amp that runs the sub. Not to mention I completely re-wired the stereo, and I have component speakers up front and the crossovers are in the back under the seat along with the amps. That means the 4 front speakers, the RCA's, and the amp power wire all have to run from the front of the jeep to underneath the rear seats. 2 sets of the RCA's are ran up and behind the glove box and underneath the door sill panels. just tuck em up in there and you can zip tie them to existing wires to keep them from hanging down.
__________________
1996 Grand Cherokee- 4.0, 4.5 lift, 33 inch KM2's, built 8.8 and lots more 1997 Grand Cherokee- 5.9 swap, lifted |
|
|
|
|
|
#5 |
|
Senior Member
Grand Junkie
Join Date: May 2011
Location: Spokane WA
Posts: 298
|
I also have a couple of amps, I ran mine through the drivers side zip tied it out of the way.
__________________
1999 WJ 4.7L, LED switch-backs, 55w HID fogs and low beams, BFG Roof rack, 20% tint, RC dual steering stabilizer, 4" RC + 2" BB, 32's + more Build thread http://www.nagca.com/forum/showthread.php?t=45630 |
|
|
|
|
|
#6 |
|
Member
Grand Rookie
Join Date: Oct 2009
Location: Oklahoma City
Posts: 98
|
There was a small passage in the metal frame from behind the heater controls that goes under the steering wheel. I brought mine out that passage, up and over the steering column, zip tired it to other wires to hold it out of the way, down the driver side kick panel, down the door seals, under the carpet and under the back seat.
__________________
'98 ZJ 5.9 2" BB, 31's, NP231 |
|
|
|
| Sponsored Links | |
Advertisement | |
![]() |
| Thread Tools | |
| Display Modes | |
|
|